Benutzer-Werkzeuge

Webseiten-Werkzeuge


artec_scanner_e_48u_unter_xsane

Artec Scanner e+ 48U unter XSane und Simple Scan

XSane

Damit der Artec Scanner auch unter Linux (Ubuntu 9.10) mit XSane funktioniert, benötigt man den Windows-Treiber. Diesen gibt's hier im Download oder auf der Treiber-CD des Herstellers. Dieser wird in das Verzeichnis /usr/share/sane/artec_eplus48u, das man noch anlegen muss, kopiert.

mkdir /usr/share/sane/artec_eplus48u
cp Artec48.usb /usr/share/sane/artec_eplus48u/

Simple Scan

O.g. Beschreibung funktioniert unter Simple Scan (Ubuntu 14.04) genauso. Falls XSane nicht installiert ist, muss ggfls. noch das Verzeichnis /usr/share/sane angelegt werden.

mkdir /usr/share/sane
mkdir /usr/share/sane/artec_eplus48u
cp Artec48.usb /usr/share/sane/artec_eplus48u/

Außerdem sollte geprüft werden, ob unter /etc/sane.d eine Datei „artec_eplus48u.conf“ mit folgendem Inhalt vorhanden ist.

artec_eplus48u.conf
# artec_eplus48u - SANE Backend configuration file
 
# This section is for use with the Artec E+ 48U scanner
# This scanner is also sold as
# Tevion MD 9693, Medion MD 9705, Medion MD 9693, Medion MD4394
# This sections contains verbose description of each option.
# For other scanners, see below.
#
# The USB section:
# each device needs at least the following line:
# usb vendor-ID and product-ID
# Every device configuration in this file must begin with an usb entry.
usb 0x05d8 0x4003
 
# Path to the firmware file
# This file comes with the Windows driver
# The scanner won't work without it
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
 
# Is the scanner an Artec E Plus Pro (or compatible)? 0 = no, 1 = yes
option ePlusPro   0
 
# for adjusting the default gamma values
option redGamma         1.0
option greenGamma       1.0
option blueGamma        1.0
option masterGamma      1.9
 
#Use this options to set the default offset and exposure time values.
option redOffset        0x28
option greenOffset      0x2f
option blueOffset       0x2f
option redExposure      0xa7
option greenExposure    0x116
option blueExposure     0xdc
 
# The vendor and model string
# This string is displayed by the frontends. If you do not want to get your
# scanner reported as "Artec E+ 48U", then change the option accordingly.
option vendorString "Artec"
option modelString "E+ 48U"
 
# device-name
#
# If autodetection does not work, then you can specify the device here
# The device entry must be the last one in this config file (or the last one before a
# new usb entry).
#If you are using libusb, a device looks like this:
#device libusb:001:002
#If you are using the scanner module (kernel driver), a device looks like this:
#device /dev/usbscanner
 
# ----------------------------------------------------------------------------
 
# Since the Trust Easy Webscan 19200 uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4006
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option vendorString "Trust"
option modelString "Easy Webscan 19200"
 
# ----------------------------------------------------------------------------
 
# Since the Memorex Mem48U uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4005
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option vendorString "Memorex"
option modelString "MEM 48U"
 
# ----------------------------------------------------------------------------
 
# Since the Trust 240H Easy Webscan Gold uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4007
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option ePlusPro         1
option vendorString "Trust"
option modelString "240H Easy Webscan Gold"
 
# ----------------------------------------------------------------------------
 
# Since the UMAX AstraSlim SE uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4009
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option vendorString "UMAX"
option modelString "AstraSlim SE"
 
# ----------------------------------------------------------------------------
 
# This section is for the Artec E+ Pro
# Note, that the name of the firmware file is called 1200.usb for
# this device
usb 0x05d8 0x4004
option artecFirmwareFile /usr/share/sane/artec_eplus48u/1200.usb
option ePlusPro   1
option vendorString "Artec"
option modelString "E+ Pro"
 
# ----------------------------------------------------------------------------
 
# This section is for the UMAX AstraSlim 1200 SE
# Note, that the name of the firmware file is called 1200.usb for
# this device
usb 0x05d8 0x4010
option artecFirmwareFile /usr/share/sane/artec_eplus48u/1200.usb
option vendorString "UMAX"
option modelString "AstraSlim 1200 SE"
 
# ----------------------------------------------------------------------------
 
# Since the Yakumo Scan50 uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4011
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option vendorString "Yakumo"
option modelString "Scan50"

JB 2014/12/16 10:12

artec_scanner_e_48u_unter_xsane.txt · Zuletzt geändert: 2015/05/28 22:18 von admin